Eachine X220s + Fatshark Attitude V5

fatshark attitude v5 oled 5.8ghz true diversity rf support dvr av-in/out fpv goggles

the attitude v5 headset launches this summer as the feist y little brother to the dominator hdo. the headset represents a leap forward with the same 30° field of view (fov) as the dominator v3, high-performance vga oled micro-displays, and great pricing.

the limited edition of machine green goggles comes with a digital video recorder (dvr) and an included 5.8ghz oled dual-receiver diversity making this a comprehensive high-performance package.

the included, simple-to-use receiver has one-touch band change capability, channel scanning and a spectrum analyzer for clean and simple channel selection along with internal routing for the second receiver to keep the front of the goggles looking crisp and clean.

specifications

optics

fov (field of view): 30°

format: 4:3

interpupillary distance (ipd): 59 to 69 mm (adjustable)

diopter lens slot: available (lens purchase separately)

micro display

resolution
640 x 400 oled (ntsc/pal auto selection)

electrical

dvr: analog video recording

support to 32gb sd (avi file)

support playback recording file

firmware upgrade via sd c ard

auto save recording file when power off

wireless receiver: true diversity receivers with oled display

(auto scan channel/spectrum analyzer)

interfaces: dc power port

av in/out port

earphone jack

color: black and green

fan plate: face foam and vel cro sticker(easy replacement)

anti-fogging mini fan

user manual

attitude v5 manual

package included

1x attitude v5 oled headset

1x 5.8g diversity receiver with oled display

1x 5.8ghz spironet circular polarized antenna

1x 5.8ghz fs rhcp patch antenna

1x 18650 li-ion battery case

1x zipper case for carrying

warning: exposing the lens to direct sunlight will result in lcd damage.

eachine wizard x220s fpv racer rc drone f4 5.8g 72ch 30a dshot600 800tvl flysky i6x rtf

eachine wizard x220s omnibus f4 5.8g 40ch vtx 30a blheli_s dshot600 esc 800tvl camera with 30° runcam3/gopro session camera mount

dear customers,
attention please.the flexible glue anti-vibration motor pad may cause the motor to slip, please check and tighten the screws before flying.best regards,banggood

description:

itemspecificationeachine wizard x220s
wheelbase: 220mm
frame arm: 4mm carbon fiber
weigh: 356g (without battery and camera mount)
take off weigh: 561g
package weigh: 1728g3k carbon fiber frame kit, 4mm thickness and 15mm width frame arms, the width is 10mm less than eachine wizard x220.frame kit with camera angle scale and 30° camera mount for runcam 3 gopro session.anti-vibration sponges to protect the racer frome crashing.
eachine mn2206 2300kv motor
kv: 2300
max thrust: 1100g
length: 35mm
no.of cell: 3-5s
diameter: 28mm
framework: 12n14p
shaft: 5mm
propeller: 5 inch
weight: 28geachine 30a blheli_s 4 in 1 esc
con. current: 30a
peak current (10s): 35a
input voltage: 2-5s
bec: 5v output
programming: yes
firmware: blheli_s
weight: 28g
size: 36*36mm
eachine 1179 800tvl ccd camera
color: purple
sensor: ccdresolution(horizontal center): 800tvlshell size: 25mm*25mmweight: 11gresolution: pal: 1980h×1080 (2mp)format: palvideo output: 1.0vp-p/75ωautomatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55db.awb: on/offexposure mode: electron exposureelectronic shutter: 1/50(1/60) – 1/100000 sgamma correction: 0.45/1.0synchronization method: internal synchronizationlens: standard 2.8mm lensworking voltage: dc12v (wide voltage, measured that can be work in 5-13v)workig current: 70ma (low power consumption)workig temperature: -20℃–60℃humidity: 0%~98%strong backlighting effect
5.8g 40ch 25mw 200mw 600mwswitchable transmitter
video format : ntsc/pal
channel: 40ch
operating temperature : -10~85℃
connector: rp-sma femaleantenna connector: rp-sma maleomnibus f4 v3 flight controller
size: 36x36mmmount holes: 30.5×30.5mm
stm32 f405 mcu, runs betaflight 3.0.1 firmware, could run faster loop time.using f4 mcu controls osd over spi bus in dma mode.osd configation has been included in betaflight gui.sbus/ppm input (pinheaders)6pwm output (1-4pinheaders and sh1.0 plug, 5-6 as pinheaders)with barometerspi sensor mpu6000
included 128mbit flash, please always use bec for the fc.supported by betaflight and droninflysky fs-i6x 2.4ghz 10ch remote control
channel: 6-10 (default 6)model type: fixed-wing/glider/helicopterrf range: 2.408-2.475ghzrf power: < 20dbmrf channel: 135bandwidth: 500khz2.4ghz system: afhds 2a / afdhsmodulation type: gfskstick resolution 4096low voltage warning: < 4.2vdsc port: ps/2 port ppmchargeable: noantenna length: 26mm (dual antenna)weight: 392gpower: 6v dc 1.5aa*4display: stntransflective display, lcd 128×64 lattice, va 73x39mm, lcd with white backlightsize: 174x89x190mmon-line update: yescolor: blackcertificate: ce0678, fcc id: n4zflyskyi6xflysky fs-a8s receiver
channels: ppm 8ch
model type: multi-rotorfrequency range: 2.408-2.475ghzband width: 500khzband number: 135rx sensitivity: -92 dbm
2.4ghz system: afhds 2amodulation type: gfsk
dsc port: ppm
transfer method: fhss
data output: 1.5mm*3 pin ppmantenna length: 26mm (not including brass contacts)input power supply: 4.0-8.4v
display method: led
no ground interference ( transmitting and receiving 1 m from the ground): >300m
working current: 40ma
each channel data: depend on the transmitter
channel delay: <15ms
size: 20*14*5.3mmweight: 1.2gcertificate: ce0678, fccid: n45za8s001500mah 4s 14.8v 75c battery
capacity(mah) : 1500cells (s): 4weight (g): 177length(mm): 80width(mm): 30height(mm): 33connector: xt60
eachine 5051 3-blade propeller
color: purple
quantity: 10 pairs
mounting hole: 5mm
 
faq===
 

rtf

lengkap

tinggal terbang

package included:

1 x eachine wizard x220s frame kit

1 x flysky fs-i6x remote control

1 x flysky fs-a8s receiver

2 x 2206 2300kv motor cw

2 x 2206 2300kv motor ccw

1 x eachine 30a blheli_s 4 in 1 esc

1 x omnibus f4 v3 flight controller

1 x 800tvl camera

1 x 5.8g 40ch 25mw 200mw 600mw switchable vtx

10 x eachine 5051 3-blade propeller purple cw

10 x eachine 5051 3-blade propeller purple ccw

1 x 1500mah 4s 14.8v 75c battery
1 x 30° camera mount(for runcam3/gopro session)

1 x charger

1 x pagoda antenna

2 x battery strap

2 x wrench
(package doesn’t include runcam 3, the runcam 3 on the pictures for reference only.)

the attitude v5 headset launches this summer as the feist y little brother to the dominator hdo. the headset represents a leap forward with the same 30° field of view (fov) as the dominator v3, high-performance vga oled micro-displays, and great pricing.

the limited edition of machine green goggles comes with a digital video recorder (dvr) and an included 5.8ghz oled dual-receiver diversity making this a comprehensive high-performance package.

the included, simple-to-use receiver has one-touch band change capability, channel scanning and a spectrum analyzer for clean and simple channel selection along with internal routing for the second receiver to keep the front of the goggles looking crisp and clean.

specifications

optics

fov (field of view): 30°

format: 4:3

interpupillary distance (ipd): 59 to 69 mm (adjustable)

diopter lens slot: available (lens purchase separately)

micro display

resolution
640 x 400 oled (ntsc/pal auto selection)

electrical

dvr: analog video recording

support to 32gb sd (avi file)

support playback recording file

firmware upgrade via sd c ard

auto save recording file when power off

wireless receiver: true diversity receivers with oled display

(auto scan channel/spectrum analyzer)

interfaces: dc power port

av in/out port

earphone jack

color: black and green

fan plate: face foam and vel cro sticker(easy replacement)

anti-fogging mini fan

user manual

attitude v5 manual

package included

1x attitude v5 oled headset

1x 5.8g diversity receiver with oled display

1x 5.8ghz spironet circular polarized antenna

1x 5.8ghz fs rhcp patch antenna

1x 18650 li-ion battery case

1x zipper case for carrying

warning: exposing the lens to direct sunlight will result in lcd damage.